Mt. Pleasant Window & Remodeling Co. builds tub-to-shower conversions in Franklin Park, PA. We pull the old tub, waterproof the wet area, and set a high-density non-porous acrylic shower on a 60 lb. mortar bed. A senior installer leads the job, and photo documentation records each phase. We’re a family-owned company with 50+ years serving Greater Pittsburgh.
Tub-To-Shower Conversion In Franklin Park, PA
One Wet Area, Handled By A Senior Installer With Photo Documentation At Every Step
A Walk-In Shower Set On A 60 Lb. Mortar Bed With Full Waterproofing Behind The Walls
Stepping over a tub wall gets harder every year, and a lot of homeowners never use the soak tub anyway. A tub-to-shower conversion in Franklin Park, PA turns that space into a low-step walk-in shower you actually use daily.
We start by looking at how your bathroom is plumbed and framed, then plan the swap around it. The wet area is the part that matters most. Behind our shower walls sits a moisture-proof barrier, and the pan rests in a heavy mortar bed, not on standard drywall or a thin backer.
That’s how a tub-to-shower conversion holds up for decades. Every project begins with a free, no-obligation in-home consultation and a clear written estimate before any work starts.
How We Handle a Tub-to-Shower Conversion In Franklin Park, PA
Here’s the order we follow during every Allegheny County, PA tub-to-shower conversion, from the first look at your bathroom to the last seal on the new shower.
Here’s the order we follow during every Allegheny County, PA tub-to-shower conversion, from the first look at your bathroom to the last seal on the new shower.
Measuring And Planning The Swap
We start at your home, measure the tub footprint, and check the plumbing and framing around it. We look at where the drain sits, how the walls are built, and whether the layout supports a curbless or low-threshold shower. This tells us exactly what your space allows before we quote anything.
You get a plan and a written price with no surprises mid-project.
Removing The Tub And Prepping The Wet Area
We pull the old bathtub and open the walls to see what’s behind them. Water damage often hides here, so we address any soft or rotted framing before the new shower goes in. Then we install a moisture-proof barrier across the wet area. Skipping this step is where cheap conversions fail. Doing it right keeps water out of your walls and subfloor.
Setting The Pan And Acrylic Walls
We set the shower pan in a 60 lb. mortar bed so it sits dead level and stays put. Then we install high-density non-porous acrylic walls that resist mold and wipe clean. This surface density is one of the details other contractors skip. The result is a shower that drains right, feels solid underfoot, and won’t stain or absorb moisture over time.
Final Seal And Cleanup
We seal every seam, set your fixtures and glass, and test the drain and water flow. A senior manager verifies the work, and photo documentation captures each phase. Before we leave, we clean the whole space and haul off the old tub. We leave your bathroom better than we found it, ready to use once the sealant cures.
Design Choices That Shape Your Franklin Park, PA Tub-To-Shower Conversion
You’ll need to decide on a few things to determine what your converted shower looks like and how it works from day to day. Here’s what to think through.
You’ll need to decide on a few things to determine what your converted shower looks like and how it works from day to day. Here’s what to think through.
Picking Your Threshold Height
The step-in height changes how easy the shower is to enter. A low threshold clears the old tub wall you used to climb over, while a near-curbless setup gives the flattest entry your framing allows. We check the drain and floor build during the measure and tell you which options your bathroom supports.
Choosing Your Acrylic Wall Style
Our high-density acrylic walls come in different colors and patterns, including tile-look and stone-look finishes. The surface is non-porous, so it resists mold and wipes down fast. You pick the look that fits the rest of your bathroom, and it performs the same either way.
Adding Seating And Storage
A built-in bench gives you a place to sit, and recessed niches hold bottles without a hanging caddy. These get planned before the walls go up, so they’re framed and waterproofed as part of the wet area. Tell us how you use the shower, and we’ll fit them in to meet your needs.
Selecting Glass And Fixtures
A glass door or panel keeps the walk-in feel and lets light through, while your fixtures set the finish. We help you match the hardware to your faucets and mirrors. All of it goes in during the final phase, after the walls and pan are set and sealed.
Why Choose Mt. Pleasant Window & Remodeling Co. For Your Franklin Park, PA Tub-To-Shower Conversion?
Knowing who will be completing your Allegheny County, PA tub-to-shower conversion sets the tone for the whole project. Here’s what sets us apart from 99% of other local contractors.
Knowing who will be completing your Allegheny County, PA tub-to-shower conversion sets the tone for the whole project. Here’s what sets us apart from 99% of other local contractors.
- No Pop-And-Drop Shortcuts: We refuse the “pop-and-drop” shortcuts other crews take on bathrooms. A senior installer leads your tub-to-shower conversion, and nothing moves to the next phase until the last one is verified. This is the technical DNA behind every wet-area job we build.
- Candor On Itinerary And Price: We give you a clear written estimate after the in-home measurement, and we tell you straight what your bathroom’s plumbing and framing allow. Candor is one of our four core values, alongside putting the customer first, care, and remaining driven. There are no mid-project surprises.
- A Family Business Since 1975: The Wrobleski family founded this company in 1975, and the second and third generations run it today. We’ve served Greater Pittsburgh for 50+ years with 150+ years of combined crew experience. That history is why we treat your bathroom like our own.
- Photo Documentation On Every Phase: A senior manager oversees each project, and we record every technical step with photo documentation. You can see the waterproofing and mortar bed that end up hidden behind your finished walls. That proof is baked into The Mt. Pleasant Way.
- We Don’t Disappear Once The Check Clears: We stand behind our work and our product selection long after the job wraps. If something isn’t right afterward, we own it and fix it. You call us directly, and we’ll handle it, because that’s how we’ve kept homeowners satisfied for three generations.
When you invite us into your home to complete tub-to-shower conversions or other remodeling projects, we understand how much trust you’re giving us. Not only will we get the job done, but we’ll do it well and stand behind it.
Homeowner Reviews For Tub-To-Shower Conversions In Franklin Park, PA By Mt. Pleasant Window & Remodeling Co.
Homeowners across the region have left 800+ five-star reviews on Google, Angi, Facebook, and the BBB. Many share video testimonials from their own neighborhoods. Here’s a sample of what they say about our work.
Homeowners across the region have left 800+ five-star reviews on Google, Angi, Facebook, and the BBB. Many share video testimonials from their own neighborhoods. Here’s a sample of what they say about our work.
The Price Was Very Fair For The Quality Of Products And The Quality Workmanship
My husband and I are definitely pleased with the service and quality!
Totally Prepared And Worked Well With Each Other
Tub To Shower Conversion Questions From Franklin Park, PA Homeowners
Here are straightforward, honest answers to what we hear most before a tub becomes a walk-in shower.
Do you serve other areas near Franklin Park, PA?
A: Yes, we work throughout Greater Pittsburgh and Allegheny County, PA. We also work in the surrounding Westmoreland County communities. You can browse our full list of service areas across Greater Pittsburgh or reach out directly for address coverage confirmation.
How much does a tub-to-shower conversion cost in Franklin Park, PA?
A: Cost depends on the size of the wet area, the acrylic and glass you pick, the fixtures, and any framing or water damage we find after removing the tub. We give you a written price after the free in-home measurements are taken. There’s no charge and no obligation to move forward with our services.
What are the shower walls made of?
A: We install high-density non-porous acrylic walls during tub-to-shower conversions. The non-porous surface resists mold and stains and wipes clean fast, unlike grout lines that trap moisture. The overall density is one of the product details we look at that other contractors ignore.
What if you find water damage behind the tub?
A: We address any soft or rotted framing before the new shower goes in. Opening the walls during removal is the only way to see what’s back there. We show you what we find with photo documentation and handle the repair as part of the job, so the new shower sits on sound framing that you can trust.
Why set the shower pan in a mortar bed?
A: A 60 lb. mortar bed keeps the pan dead level and fully supported, so it doesn’t flex or crack over time. Standard drywall or a thin backer can’t do that in a wet area. This foundation, plus a moisture-proof barrier behind the walls, is what keeps water out of your subfloor.
Schedule Your Free, In-Home Consultation
Are you searching for a proven home remodeling company in Greater Pittsburgh? Mt. Pleasant Window & Remodeling has offered exceptional window, doors, bathroom, siding, and roofing services to local communities for 50+ years. Call us today for more information and to schedule your free, no-obligation consultation.
